Question No. 1

Which three authentication types can a Citrix Administrator use for NetScaler AAA dual-factor authentication? (Choose three.)

• A. TACACS+
• B. RADIUS
• C. ADFS
• D. LINUX
• E. LDAP

Question No. 2

Which policy will allow a Citrix Administrator to modify all the URLs in the response body from 'http://' to 'https://' in an SSL offload deployment?

• A. add rewrite action Act1 replace_all ''HTTP.RES.BODY(200000)'' ''''http://''" --pattern ''https://''add rewrite policy Pol1 true Act1 NOREWRITE
• B. add rewrite action Act1 replace_all ''HTTP.RES.BODY(200000)'' ''''http:''" --pattern ''https://''add rewrite policy Pol1 true Act1 NOREWRITE
• C. add rewrite action Act1 replace_all ''HTTP.RES.BODY(200000)'' ''''https://''" --pattern ''http://''add rewrite policy Pol1 true Act1 NOREWRITE
• D. add rewrite action Act1 replace_all ''HTTP.RES.BODY(200000)'' ''''https:''" --pattern ''http://''add rewrite policy Pol1 true Act1 NOREWRITE

Question No. 3

Users are experiencing resets from the Intranet server website, which is load-balanced through the NetScaler.

Which NetScaler tool can a Citrix Administrator use to troubleshoot the reset issue?

• A. Take a packet trace with nstrace and analyze with WireShark.
• B. View the new nslog from the command-line interface (CLI) to look for packet resets from the NetScaler.
• C. Look in the Event Viewer for packet resets from the NetScaler.
• D. Use the nslog to look for packet resets on the NetScaler.

Question No. 4

Scenario: A Citrix Administrator has configured the rewrite action as follows:

add rewrite action sync_date replace http.res.date sys.time

What is the correct way to interpret this rewrite action?

• A. The rewrite action replaces the Date header in the http response with the GMT time stamp.
• B. The rewrite action replaces the Date header in the http response with the NetScaler system time in a conventional date format.
• C. The rewrite action is invalid, as system time CANNOT be referenced in the system policy.
• D. The rewrite action replaces the NetScaler system time with the Date header in a conventional date format.

Question No. 5

Scenario: A Citrix Administrator is concerned about the amount of health checks the NetScaler is sending to the backend resources. The administrator would like to find a way to remove health checks from specific bound services.

How can the administrator accomplish this?

• A. Use the No-Monitor option.
• B. Use Service Groups to minimize health checks.
• C. Unbind the current monitor.
• D. Use reverse condition monitoring.

Question No. 1

In which form does Virtual SAN store and manage data?

• A. Files
• B. Disks
• C. Objects
• D. Blocks

Question No. 2

Which are five key benefits of the VMware vRealize Suite cloud management platform? (Choose five.)

• A. Business/ IT Alignment
• B. Control
• C. Agility
• D. Security
• E. Optimize
• F. Configuration Management
• G. Efficiency

Question No. 3

Which two statements are true for vRealize Business for Cloud? (Choose two.)

• A. It provides costing for non-vSphere workload by directly integrating with them.
• B. It provides public cloud costing, consumption analysis, and pricing.
• C. It collects performance data through the agents that are deployed in the cloud workloads.
• D. It provides costing for native services hosted on AWS and Azure cloud.
• E. It provides Automatic private cloud metering, costing, and pricing.

Question No. 4

Which feature of VMware vSphere will automate the process of migrating virtual machines to fewer hosts during times of low workloads?

• A. FT
• B. EVC
• C. DPM
• D. HA

Question No. 5

Which four application services are delivered by VMware Horizon 7? (Choose four.)

• A. Packaged apps with VMware ThinApp
• B. Virtualized apps from Citrix
• C. SaaS apps
• D. Helpdesk ticketing system
• E. RDS hosted apps
• F. Anti-virus services

Question No. 1

Select three RSS options which are available using activation keys:

• A. HD live streaming
• B. Encryption
• C. 1080P
• D. Multicast

Question No. 2

Which RMX function allows you to schedule future conferences?

• A. There is no such function
• B. Calendaring
• C. Scheduling
• D. Reservations

Question No. 3

Which of the following is the name that registers RMX conferences, meeting rooms and entry queues in any gatekeeper or SIP server?

• A. Display name
• B. Routing name
• C. E .164 alias
• D. H .323 name

Question No. 4

Which Virtualization Manager (DMA) function refers to the ability to recover quickly from an interrupting event?

• A. Scalability
• B. Redundancy
• C. Virtualization
• D. Resiliency

Question No. 5

Your customer has an issue with their Virtualization Manager (DMA) and they contact Polycom Global Services for support, Select the option which best describes what they will need to supply PGS:

• A. System Log Files plus any additional files specifically requested
• B. Troubleshooting Utilities plus any additional files specifically requested
• C. System Log Files
• D. Troubleshooting Utilities

Question No. 1

When Dynamic Dispatcher is enabled, connections are assigned dynamically with the exception of

• A. Threat Emulation
• B. HTTPS
• C. QOS
• D. VolP

Question No. 2

VPN Tunnel Sharing can be configured with any of the options below, EXCEPT One:

• A. Gateway-based
• B. Subnet-based
• C. IP range based
• D. Host-based

Question No. 3

How many pre-defined exclusions are included by default in SmartEvent R80 as part of the product installation?

• A. 5
• B. 0
• C. 10
• D. 3

Question No. 4

To find records in the logs that shows log records from the Application & URL Filtering Software Blade where traffic was blocked, what would be the query syntax?

• A. blade: application control AND action:block
• B. blade; ''application control'' AND action;block
• C. (blade: application control AND action;block)
• D. blade: ''application control'' AND action:block

Question No. 5

In SPLAT the command to set the timeout was idle. In order to achieve this and increase the timeout for Gaia, what command do you use?

• A. set idle
• B. set inactivity--timeout
• C. set timeout
• D. set inactivity

Question No. 1

When Dynamic Dispatcher is enabled, connections are assigned dynamically with the exception of

• A. Threat Emulation
• B. HTTPS
• C. QOS
• D. VolP

Question No. 2

VPN Tunnel Sharing can be configured with any of the options below, EXCEPT One:

• A. Gateway-based
• B. Subnet-based
• C. IP range based
• D. Host-based

Question No. 3

How many pre-defined exclusions are included by default in SmartEvent R80 as part of the product installation?

• A. 5
• B. 0
• C. 10
• D. 3

Question No. 4

To find records in the logs that shows log records from the Application & URL Filtering Software Blade where traffic was blocked, what would be the query syntax?

• A. blade: application control AND action:block
• B. blade; ''application control'' AND action;block
• C. (blade: application control AND action;block)
• D. blade: ''application control'' AND action:block

Question No. 5

In SPLAT the command to set the timeout was idle. In order to achieve this and increase the timeout for Gaia, what command do you use?

• A. set idle
• B. set inactivity--timeout
• C. set timeout
• D. set inactivity

Question No. 1

Which command will allow you to see the interface status?

• A. cphaprob interface
• B. cphaprob --I interface
• C. cphaprob --a if
• D. cphaprob stat

Question No. 2

CoreXL is supported when one of the following features is enabled:

• A. Route-based VPN
• B. IPS
• C. IPv6
• D. Overlapping NAT

Question No. 3

Check Point Management (cpm) is the main management process in that it provides the architecture for a consolidates management console. CPM allows the GUI client and management server to communicate via web services using ___________.

• A. TCP port 19009
• B. TCP Port 18190
• C. TCP Port 18191
• D. TCP Port 18209

Question No. 4

If an administrator wants to add manual NAT for addresses now owned by the Check Point firewall, what else is necessary to be completed for it to function properly?

• A. Nothing - the proxy ARP is automatically handled in the R80 version
• B. Add the proxy ARP configurations in a file called /etc/conf/local.arp
• C. Add the proxy ARP configurations in a file called $FWDIR/conf/local.arp
• D. Add the proxy ARP configurations in a file called $CPDIR/conf/local.arp

Question No. 5

When using CPSTAT, what is the default port used by the AMON server?

• A. 18191
• B. 18192
• C. 18194
• D. 18190

Question No. 1

The message "Hard Disk Error" is displayed on the screen during Stage 1 of the GRUB boot process. What does this indicate?

• A. The kernel was unable to execute /bin/init
• B. The next Stage cannot be read from the hard disk because GRUB was unable to determine the size and geometry of the disk
• C. One or more of the filesystems on the hard disk has errors and a filesystem check should be run
• D. The BIOS was unable to read the necessary data from the Master Boot Record to begin the boot process

Question No. 2

You are trying to make a hard link to an ordinary file but ln returns an error. Which of the following could cause this?

• A. The source file is hidden.
• B. The source file is read-only.
• C. The source file is a shell script.
• D. You do not own the source file.
• E. The source and the target are on different filesystems.

Question No. 3

Which of the following commands can be used to perform a full text search on all available packages on a Debian system?

• A. apt
• B. apt-cache
• C. apt-get
• D. apt-search
• E. dpkg

Question No. 4

Which of the following apt-get commands will install the newest versions of all currently installed packages without removing any packages or installing new packages that are not already installed?

• A. auto-update
• B. upgrade
• C. dist-upgrade
• D. install
• E. update

Question No. 5

Which of the following explanations are valid reasons to run a command in the background of your shell?

• A. The command does not need to execute immediately.
• B. The command has to run immediately but the user needs to log out.
• C. The system is being shut down and the command needs to restart execution immediately after the reboot.
• D. The command can run at a lower priority than normal commands run on the command line.